3/8" Hex AutoLock™ Tek Screw Driver
Drive standard 3/8" hex washer head #14 self drilling tek screws with total confidence using the AutoLock™ driver. This driver locks onto a screw to eliminate dropping and bucking screws sideways for greater productivity. There are no magnets to attract metal shavings and debris.
- Hold a screw by the tip and push it into the driver. The driver triggers forward to lock in the screw.
- Drive the screw all the way in. The head is automatically released ~1/2" before full install.
- Patent-pending design easily locks onto screws when loading and self releases during installation.
- Heat treated alloy steel for long life.
- 1/4" hex quick change shank.
- Floating neo-bonded washers will not interfere with tool operation as long as there is a 1/4" gap between the washer and screw head.
- Largest diameter of tool is 1-1/8".
- 3/4" recommended minimum screw length.
- Since AutoLock™ drivers lock around the screw head, non-standard screws with washer head diameters greater than 17/32" are not compatible with this driver. Looking to drive a different type of screw? Send us a message through our About Us page.